Restarting a single PSAPPSRV process

Is your PeopleSoft Environment experiencing memory leak? The steps below would be usefull when recycling a single PSAPPSRV process, removing the need to bring down the entire application server.


Make sure that you kill and reboot a single PSAPPSRV process at a time!

The steps below is for a UNIX box:

1. Type the command below to check which PSAPPSRV process is eating up alot of memory:
  ps -ef | grep PSAPPSRV
2. Get the number beside hte -i parameter.
3. Navigate to your PSADMIN and go to the tuxedo command line.
4. type the following to kill this PSAPPSRV process:
  shutdown -g APPSRV -i <#>
5. Reboot this PSAPPSRVprocess:
  boot -g APPSRV -i  <#>

==========


The steps below is for Windows server 2008 box:

1. Open task manager.
2. Click on View > Select Columns. Check "command line" and OK as shown below;

3. On your Task Manager, Sort your window by high memory consumption and highlight the top PSAPPSRV.exe process.

4. From the command line tab, select the value next to the -i parameter of this offending PSAPPSRV.exe process.

5. Navigate to your PSADMIN and go to the tuxedo command line.

6. type the following to kill this PSAPPSRV process:
  shutdown -g APPSRV -i <#>
7. Reboot this PSAPPSRVprocess:
  boot -g APPSRV -i  <#>

Upgrading MicroFocus for COBOL

Requirement: To upgrade the existing Microfocus 4.0SP2 to Microfocus 5.0 WP4. After the upgrade, MS 4.0SP2 Runtime license will still be loaded as this is still being used by an older version of PS (8.47). The compiler will now use MS 5.0, COBOLs compiled on this version can still run with MS 4 as this is backwards compatible. License used is the same with what was previously used for MS 4.


The upgrade was done on a Sun Solaris environment, where there are separate boxes for the application server and the process scheduler. The compiler will be installed on the process scheduler server only, while the runtime license will be installed on both boxes.

Applies to	Steps	Details/Comments	Command
N/A	Acquire ULP ( ps-sx-auto.tar )	email licensecodes_ww@oracle.com  with the following details: Full Company Name:   CSI:                              Order:                          Purchase Order #:
Application Server, PSUNX Server	Upload installers to servers	upload ps-sx-auto.tar and SX50_WP4_sun_sparc_dev.tar to /opt/software/peoplesoft/thirdparty/Microfocus/MF5.0 of Application Server and PSUNX Server
PSUNX Server	Shutdown mflm_manager if still running		sudo su - root COBDIR=/opt/microfocus/4.0SP2;export COBDIR cd /opt/microfocus/4.0SP2/mflmf ps -ef | grep mflm_manager ./lmfgetpv k
		To verify if license manager is shutdown	./lmfgetpv
Application Server, PSUNX Server	Back up old installation		cd /var mv mfaslmf mfaslmf.bak.<yyyymmdd> cd /tmp mv ULP ULP.bak.<yyymmdd> cd /opt/microfocus mv 4.0SP2 4.0SP2.bak.<yyymmdd>
Application Server, PSUNX Server	Install micro focus net express 5.0	NOTE: This installation is also required by the Application Server servers so ULP could be installed.
Application Server, PSUNX Server		Create new $COBDIR	/opt/microfocus $ mkdir 5.0WP4
Application Server, PSUNX Server		Transfer SX50_WP4_sun_sparc_dev.tar to new $COBDIR	cd /opt/software/peoplesoft/thirdparty/Microfocus/MF5.0 cp -pr SX50_WP4_sun_sparc_dev.tar /opt/microfocus/5.0WP4
Application Server, PSUNX Server		Start installation	cd  /opt/microfocus/5.0WP4 tar -xf SX50_WP4_sun_sparc_dev.tar rm SX50_WP4_sun_sparc_dev.tar COBDIR=/opt/microfocus/5.0WP4;export COBDIR # echo $COBDIR /opt/microfocus/5.0WP4 ./install Do you want to continue (y/n): y Do you agree to the terms of the License Agreement? (y/n): y Please confirm your understanding of the above reference environment details (y/n): y Do you want to make use of COBOL and Java working together? (y/n): n Would you like to install LMF now? (y/n): CHOOSE n FOR APPSERVERS, CHOOSE y FOR DB SERVERS Enter the directory name where you wish to install License Manager (Press Enter for default directory /opt/microfocus/mflmf)  /opt/microfocus/5.0WP4/mflmf do you wish to create it ? (y/n)  y Do you want only superuser to be able to access the License Admin System? (y/n) n Do you want license manager to be automatically started at boot time? (y/n) y Please enter either 32 or 64 to set the system default mode: 64 Do you wish to configure Enterprise Server now? (y/n): n Do you want to install XDB? (y/n): n Installation completed successfully. The COBOL system is ready to use. chmod 750 mflmf
Application Server, PSUNX Server		Validate if mflmf and mfaslmf directoried were created	ls  /opt/microfocus/5.0WP4/mflmf ls /var/mfaslmf
Application Server, PSUNX Server		Transfer  ps-sx-auto.tar to $COBDIR/ULP	cd $COBDIR mkdir ULP cd /opt/software/peoplesoft/thirdparty/Microfocus/MF5.0 cp -pr ps-sx-auto.tar /opt/microfocus/5.0WP4/ULP
Application Server, PSUNX Server		Set variables	COBDIR=/opt/microfocus/5.0WP4;export COBDIR COBPATH="/opt/microfocus/5.0WP4/ULP:$COBPATH";export  COBPATH PATH=${COBDIR}/bin:${PATH}; export PATH LD_LIBRARY_PATH=$COBDIR/lib:$LD_LIBRARY_PATH; export LD_LIBRARY_PATH
Application Server, PSUNX Server		Install ULP (Load Runtime License)	cd /opt/microfocus/5.0WP4/ULP tar -xf ps-sx-auto.tar chmod +x p* (Set execute permission on the scripts and programs) ./psauto64
Application Server, PSUNX Server		Verify ULP installation	cd $COBDIR/aslmf ./apptrack (set an access password, before proceeding) select 1 to list summary of licenses verify values select 9 to exit
Application Server, PSUNX Server		Re-install 4.0SP2	--- install 4.0 SP2 before proceeding -- #  DO NOT install LMF from this version of Server Express  # #  Since we are going to use the LMF that was installed    # #  from Server Express 5.0 WP4                             #
Application Server, PSUNX Server		Verify ULP installation Run Time versions should show both	COBDIR=/opt/microfocus/5.0WP4;export COBDIR cd $COBDIR/aslmf ./apptrack select 1 to list summary of licenses verify values select 9 to exit
PSUNX Server		Install Development Licenses (compiler license) The utility mflmcmd is used for initial install of the Server Express Development License          It only allows one license to be installed.          The other utilities that can be used to install Development Licenses are mflicense and mflmadm.          mflicense and mflmadm are the general purpose utilities used for administering          Server Express Development licenses.          So after the initial license is installed with mflmcmd, all subsequent license additions          and deletions will be done with either mflicense or mflmadm	cd to mflmf directory ./mflmcmd Micro Focus License Manager Command Line Interface             --------------------------------------------------             Select the function you require from the list:             License Install   - Enter 'I'             I             Ready to install license             Enter the Serial Number part of the License Key:            <enter serial number>             Enter the License Number part of the License Key:            <enter license number>             License added ok             Note that the license database cannot be moved, copied,             or restored without reloading the license keys
PSUNX Server		Verify ULP installation A total of 6 lisences will appear when option 1 (licence list) is selected	cd $COBDIR/aslmf ./apptrack (set an access password, before proceeding) select 2 to list summary of licenses verify values select 9 to exit
PSUNX Server		Start License manager	cd to mflmf directory ./mflmman ps -ef| grep manager (to verify if license manager is running) review logs and check for errors (MF-LMF.log)
Application Server, PSUNX Server		Verify if new version of Cobol 5.0 is working via test cobol compile NOTE: To test Application Server/PROD servers, transfer the gnt file then run.	make sure LD_LIBRARY_PATH is setup and include 4.0 libraries:  LD_LIBRARY_PATH=/opt/microfocus/4.0SP2/lib:$LD_LIBRARY_PATH export LD_LIBRARY_PATH echo $LD_LIBRARY_PATH /opt/microfocus/4.0SP2/lib:/opt/microfocus/5.0WP4/lib:/opt/CA/SharedComponents/lib cd $COBDIR/bin ./cob -Vup $COBDIR/demo/debug/pi.cbl Go to $COBDIR/bin and check if executable file pi.gnt is created. Run pi.gnt via cobrun ./pi.gnt
Application Server, PSUNX Server		Verify if version of Cobol 4.0 is still working via test cobol compile NOTE: To test Application Server/PROD servers, transfer the gnt file then run.	Note: Set up  LD_LIBRARY_PATH and COBDIR and set them to 4.0 directories first. COBDIR=/opt/microfocus/4.0SP2;export COBDIR echo $COBDIR /opt/microfocus/4.0SP2 cd $COBDIR/bin ./cob -Vup $COBDIR/demo/debug/pi.cbl Go to $COBDIR/bin and check if executable file pi.gnt is created. Run pi.gnt via ./cobrun pi.gnt

 

UNIX commands

#########
List details of user in unix, with more details compared with listusers
adquery user -CpP <username>

#########
search and replace string in vi mode (editor)
Type in the whole thing, where String1 is the string to be replaced, and string2 is the new string.
:%s#<string1>#<string2>#g

#########
FIND

Find a specific string inside a folder and subfolders:
1. This one displays the file name and the line which contains the string:
find . -exec grep "<String>" '{}' \; -print

2. This one returns a cleaner result, with only the filename and location is returned:

find . -type f|xargs grep -ls "<string>"

#########

The FOR loop - Give a variable a default value so it will never be null
##contents below from http://www.ooblick.com/text/sh/

Quasi-variable constructs
The ${VAR} construct is actually a special case of a more general class of constructs:

${VAR:-expression}
Use default value: if VAR is set and non-null, expands to $VAR. Otherwise, expands to expression.
${VAR:=expression}
Set default value: if VAR is set and non-null, expands to $VAR. Otherwise, sets VAR to expression and expands to expression.
${VAR:?[expression]}
If VAR is set and non-null, expands to $VAR. Otherwise, prints expression to standard error and exits with a non-zero exit status.
${VAR:+expression}
If VAR is set and non-null, expands to the empty string. Otherwise, expands to expression.
${#VAR}
Expands to the length of $VAR.

Opening ports for new environment

If you have separate boxes for your applicatoin server, process scheduler and webserver, the following ports would needed to be opened to ensure your environment will boot successfully.

Ports that needed to be opened for a new PeopleSoft environment:

APPSRV 1 <--> WEB 1    APPSRV 2 <--> WEB 1
APPSRV 1 <--> WEB 2    APPSRV 2 <--> WEB 2

PSUNX ->  WEB 1
PSUNX -> WEB 2
PSNT -> WEB 1
PSNT -> WEB 2

http/https ports –   APPSRV -> WEB and PSNT/PSUNX -> WEB (means: http port needs to be opened from appsrv going to webserver etc)
WSL, JSL, JRAD, PSDBGSRV ports –   WEB -> APPSRV
REN_HTTP/REN_HTTPS ports –   APPSRV -> WEB

How To Delete Process Instance Backend

Let's say you wanted to delete a specific process instance and you want to do it backend. The script below would be helpful specially if you opted to create a script to do things automatically.


This works for Oracle Database with PT 8.49:


DELETE FROM PSPRCSRQST where PRCSINSTANCE = 1220519;
DELETE FROM PSPRCSQUE where PRCSINSTANCE = 1220519;
DELETE FROM PSPRCSPARMS where PRCSINSTANCE = 1220519;
DELETE FROM PSPRCSRQSTTEXT where PRCSINSTANCE = 1220519;
DELETE FROM PSPRCSRQSTXFER where PRCSINSTANCE = 1220519;
DELETE FROM PS_PRCSRQSTDIST where PRCSINSTANCE = 1220519;
DELETE FROM PS_AERUNCONTROL where PROCESS_INSTANCE = 1220519;
DELETE FROM PS_IN_USAGE_AET where PROCESS_INSTANCE = 1220519;

How To Check Latest/All Bundles and Patch Applied

There are two ways to check what bundles and patches are applied to your PeopleSoft environment, online and back-end:

Online:

Login to your application then follow the navigation below to check latest bundle applied:

PeopleTools> Utilities>Administration> Updates - View All

Back-end:

You can select the any of the following tables to check the latest updates to your application:

PS_TAX_UPDATE

PS_MAINTENANCE_LOG

List all PeopleTools table

One way of listing all PeopleSoft PeopleTools table is to open the mvprdexp.dms script. This is located in your $PS_HOME/scripts directory. This data mover script is used to export the all of the PeopleTools tables from an environment which can then be imported into another environment with the mvprdimp.dms script.

Step by Step PIA Installation

Below are the steps in installing PIA for PT8.49 on a Sun Solaris environment.

Navigate first to your $PS_HOME/ setup/PsMpPIAInstall and run the following

export DISPLAY=0.0

-I’ve inherited running this command first from my lead and has been one of my best practices since. From my experiences, this command basically aligns the texts to the window for a more readable format. This enables the DISPLAY variable available and would be blank.

setup.solaris -is:javaconsole –console

                -invokes the delivered installer for sun solaris

<the following will be the actual snippet from the installation, with some details changed>

Initializing Wizard........

          Launching InstallShield Wizard........

Welcome to the InstallShield Wizard for PeopleSoft Internet Architecture.

Using the InstallShield Wizard you will install PeopleSoft Internet

Architecture on your computer.

Version: 8.49.19

Note: If installing onto a BEA WebLogic Server, make sure to shutdown any

running web servers to avoid web server corruption.

 Select Next to continue or Cancel to exit.

Press 1 for Next, 3 to Cancel or 5 to Redisplay [1]

Choose the directory where you installed PeopleSoft, commonly known as

"PS_HOME":

   Please specify a directory name or press Enter [/opt/psoft/CR/CRDMO]

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1]

Choose the installation type that best suits your needs.

[X] 1 - Oracle Application Server

[ ] 2 - BEA WebLogic Server

[ ] 3 - IBM WebSphere Server

To select an item enter its number, or 0 when you are finished: [0] 2

Enter 0 to continue or 1 to make another selection: [0]

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] 5

Choose the installation type that best suits your needs.

[ ] 1 - Oracle Application Server

[X] 2 - BEA WebLogic Server

[ ] 3 - IBM WebSphere Server

To select an item enter its number, or 0 when you are finished: [0]

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1]

Select the web server root directory:

Please specify a directory name or press Enter [/opt] /opt/weblogic/9.2.3

Detected web server version: WebLogic 9.2.3

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1]

Please enter the administrator login and password for WebLogic domain.

Login ID:

    [system]

Password:[password]

:

Re-type Password:[password]

:

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1]

Select domain type:

 [X]  1  -  Create New WebLogic Domain

   To select an item enter its number, or 0 when you are finished [0]:

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1]

Enter domain name or click Next to select default:

    [peoplesoft] pscrdmo

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1]

Please select the configuration to install.

[X] 1 - Single Server Domain

[ ] 2 - Multi Server Domain

[ ] 3 - Distributed Managed Server

To select an item enter its number, or 0 when you are finished: [0]

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1]

Please specify a name for the PeopleSoft web site:

Website name:

    [ps] crdmo

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1]

Enter port numbers and summaries.

AppServer name:

[] type your application server or IP address here.

JSL Port:

    [9000] type your JSL port here, default is 9000

HTTP Port:

[80] type your HTTP port here, default is 80

HTTPS Port:

    [443] type your HTTPS port here, default is 443

Authentication Token Domain:(optional)

    [] type your domain here, include the ‘.’ In the beginning (eg.  .domain.com)

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1]

Please enter the Name of the Web Profile used to configure the webserver. The

user id and password will be used to retrieve the web profile from the

database. (NOTE: Other available preset web profile names are "TEST", "PROD",

and "KIOSK".)

Web Profile Name:

[DEV]

User ID:

    [PTWEBSERVER]

Password:[PTWEBSERVER]

:

Re-type Password:[PTWEBSERVER]

:

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1]

Select the Report Repository location:

   Please specify a directory name or press Enter [/opt/psreports] /opt/psoft/psreports/CR

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1]

Setup Type :

Web server root directory :

Web server version :

Web server domain :

Internet Architecture app name :

Integration Gateway app name :

PeopleSoft Business Interlink app name :

PeopleSoft Online Library Infrastructure :

Environment Management Hub :

Hello Portlet app name :

Portlet Container app name :

Testsuite app name :

Wsrptest app name :

Site name :

Authentication Token Domain :

Application server name :

JSL port :

HTTP port :

HTTPS port :

Report repository directory :

PIA webserver directory :

weblogic

/opt/weblogic/9.2.3

9.2

pscrdmo

PORTAL

PSIGW

PSINTERLINKS

PSOL

PSEMHUB

helloportletapp

pspc

testsuite

wsrptest

crdmo

<domain will be displayed here>

<App server will be displayed here>

<JSL here>

<HTTP here>

<HTTPS here>

/opt/psoft/psreports/CR

/opt/psoft/CR/CRDMO/webserv

Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1]